Single Channel Sine Wave Dimmer - XSD-S3
- Up to 3kW output power
- No electrical disturbance, no interference
- No filament sing
- Handles a wide range of loads
- Regulated output
- High efficiency and quiet operation
- DMX and 0-10V analog input
- RDM enabled
- Intuitive user interface on a bright OLED display
- Truss mounted or freestanding operation
- Neutrik powerCON 20A or TRUE1 16A or terminal
- Neutrik XLR or terminal signal connectors
The XSD-S3 is a portable, fully RDM enabled single channel sine wave dimmer. The Swisson sine wave dimming technology has many advantages over conventional phase control dimming. As the form of the AC sine wave is always preserved, it does not produce any filament sing or electrical disturbances which could affect audio or video equipment. The output voltage and current are electronically regulated, ensuring a stable and safe output to a wide range of different loads. This also enables the dimmer to compensate fluctuations in the mains supply and detect short circuits, all while operating with a very high efficiency.
The XSD-S3 can be controlled over DMX in an 8-bit or 16-bit mode, by 0-10V analog input, and manually with the encoder knob on the device. DMX and device specific settings, such as dimmer curves or output response time, can be changed over RDM as well as directly on the dimmer, thanks to its bright OLED display. The extensive but intuitive user interface can also display detailed sensor information and offers simplified troubleshooting by issuing notifications in case something goes wrong.
Its form factor and quiet operation make it ideal for any application, be it in theatres, studios or in architectural lighting.
Weight 3 kg (6.6 lb.) Dimensions (L x W x H) 416 x 65 x 132 mm (16.4" x 2.6" x 5.2") Ambient temparature (3 kW / 2 kW) -10 to +50°C (+14 to +122°F) / -10 to +60°C (+14 to +140°F) AC power input 100-120 and 220-240 V AC (standard models), 100-120 V AC (US models) Operation frequency 50/60 Hz Nominal output power 3 kW Max output current (RMS) 13 A (standard models), 20 A (US models) Electronic fuse Yes, short circuit proof Preheat Off or 6 – 20 V Adjustable maximum voltage 100-240 V (standard models), 50-120 V (US models) DMX Personalities 2 (8-bit / 16-bit) Dimming curves 4 DMX in / through 1 / 1 DMX / RDM ANSI E1.11 / ANSI E1.20, ANSI E1.37-1 -
Documents
Designation Article Description Article Number XSD-S3-BC-5 1x3kW sine wave dimmer, powerCON 20 A (blue), 5-pin XLR 10 80 12 XSD-S3-YC-5 1x3kW sine wave dimmer, powerCON TRUE1, 5-pin XLR 10 80 18 XSD-S3-TC-T 1x3kW installation sine wave dimmer, terminal connectors 10 80 20